挂壁空调出风口滴水原因-如何解决出风口滴水问题

How to solve the problem of outlet drip - observe the source of drip

Air supply system

Such as the filter dirty block, the use of low-humidity damp air file, if the air volume is too small, the lower the evaporator temperature, evaporator frost or even freeze, over time lead to leakage.

Drainage system

Mainly including the machine before and after the guide trough, drain, pipe banding, drainage pump failure, etc., when the air conditioning for a long time, the aqueducts, drains may be blocked by dirt leakage, aqueduct and other reasons for injection molding cracks, connecting pipe Joints include poor, drainage pipes are compressed when installed will cause leakage.

3. System lack of fluoride, the evaporator half blocked

System serious lack of fluoride, the refrigerant quickly into the evaporator near the input pipe 2-3 long U tube gasification, so the evaporator near the input pipe 2-3 root length U tube fin temperature Low, while the other long U-tube fin temperature close to room temperature, so close to the input tube 2-3 root long U tube fins will condense a large number of condensate, a long time will freeze. In the case of semi-clogged evaporator, the temperature of the long U-tube fin with a large amount of snow flow is low while the temperature of the long U-tube fin with a small flow rate of the snow is high, resulting in a large temperature difference between the two flow paths. So that a large flow of snow long U tube fins condense a large amount of condensate, and blown out, and the other due to hot and cold air in the duct intersection, water vapor condensation in the duct, leading to water leakage.

4. Installation problems lead to water leakage

Mainly concentrated in the new installed, or air-conditioning installed in winter, because the installation is not horizontal or drain pipe fittings are not bandaged.