The machine is normal, remote control normal, E6 code appears. 3, there are only 2v DC voltage, remove the external machine board, found below the bottom left corner close to the bridge heap, field tube, diode D203 after a lot of pins on the chip model IPM1 fried fly A small piece, can not see the model, but the bridge and other three is good, I would like to ask which chip can change? What is the reason?
内机正常，遥控正常，出现E6代码。测外机1、3有220v，1、2只有2v直流电压，拆下外机主板，发现下图中左下角紧贴桥堆、场管、二极管D203下后很多引脚的芯片型号IPM1炸飞一小块，看不清型号，但桥堆等三个是好的，请问该芯片可换哪种?是什么原因造成?
直接换外机电器盒，没有必要去查
导读：The machine is normal, remote control normal, E6 code appears. 3, there are only 2v DC voltage, remove the external mach